Assessing the precision of a detergent-assisted cartridge precipitation workflow for non-targeted quantitative proteomics.

Detergent-based workflows incorporating sodium dodecyl sulfate (SDS) necessitate additional steps for detergent removal ahead of mass spectrometry (MS). These steps may lead to variable protein recovery, inconsistent enzyme digestion efficiency, and unreliable MS signals. To validate a detergent-based workflow for quantitative proteomics, we herein evaluate the precision of a bottom-up sample preparation strategy incorporating cartridge-based protein precipitation with organic solvent to deplete SDS. The variance of data-independent acquisition (SWATH-MS) data was isolated from sample preparation error by modelling the variance as a function of peptide signal intensity. Our SDS-assisted cartridge workflow yield a coefficient of variance (CV) of 13%-14%. By comparison, conventional (detergent-free) in-solution digestion increased the CV to 50%; in-gel digestion provided lower CVs between 14% and 20%. By filtering peptides predicting to display lower precision, we further enhance the validity of data in global comparative proteomics. These results demonstrate the detergent-based precipitation workflow is a reliable approach for in depth, label-free quantitative proteome analysis.

Enhanced Electrophoretic Depletion of Sodium Dodecyl Sulfate with Methanol for Membrane Proteome Analysis by Mass Spectrometry.

Membrane proteins are underrepresented during proteome characterizations, primarily owing to their lower solubility. Sodium dodecyl sulfate (SDS) is favored to enhance protein solubility but interferes with downstream analysis by mass spectrometry. Here, we present an improved workflow for SDS depletion using transmembrane electrophoresis (TME) while retaining a higher recovery of membrane proteins. Though higher levels of organic solvent lower proteome solubility, we found that the inclusion of 40% methanol provided optimal solubility of membrane proteins, with 86% recovery relative to extraction with SDS. Incorporating 40% methanol during the electrophoretic depletion of SDS by TME also maximized membrane protein recovery. We further report that methanol accelerates the rate of detergent removal, allowing TME to deplete SDS below 100 ppm in under 3 min. This is attributed to a three-fold elevation in the critical micelle concentration (CMC) of SDS in the presence of methanol, combined with a reduction in the SDS to protein binding ratio in methanol (0.3 g SDS/g protein). MS analysis of membrane proteins isolated from the methanol-assisted workflow revealed enhanced proteome detection, particularly for proteins whose pI contributed a minimal net charge and therefore possessed reduced solubility in a purely aqueous solvent. This protocol presents a robust approach for the preparation of membrane proteins by maximizing their solubility in MS-compatible solvents, offering a tool to advance membrane proteome characterization.

Tips And Tricks for Proteome Sample Preparation.

ARTICLES DISCUSSED: Kovalchuk, S. I., Ziganshin, R., Shelukhina, I. Simple in-house ultra-high performance capillary column manufacturing with the FlashPack approach. Journal of Visualized Experiments. (178), e62522 (2021). Sirois, I., Isabelle, M., Duquette, J. D., Saab, F., Caron, E. Immunopeptidomics: Isolation of mouse and human MHC Class I- and II-associated peptides for mass spectrometry analysis. Journal of Visualized Experiments. (176), e63052 (2021). Han, Y., Thomas, C. T., Wennersten, S. A., Lau, E., Lam, M. P. Y. Shotgun proteomics sample processing automated by an open-source lab robot. Journal of Visualized Experiments. (176), e63092 (2021). Nickerson, J. L. et al. Organic solvent-based protein precipitation for robust proteome purification ahead of mass spectrometry. Journal of Visualized Experiments. (180), e63503 (2022). Li, D., Liang, J., Zhang, Y., Zhang, G. An integrated workflow of identification and quantification on FDR control-based untargeted metabolome. Journal of Visualized Experiments. doi: 10.3791/63625-v (2022). Petelski, A. A., Nikolai Slavov, N., Specht, N. Single-cell proteomics preparation for mass spectrometry analysis using freeze-heat lysis and an isobaric carrier. Journal of Visualized Experiments. doi: 10.3791/63802 (2022).

Recent advances in top-down proteome sample processing ahead of MS analysis.

Top-down proteomics is emerging as a preferred approach to investigate biological systems, with objectives ranging from the detailed assessment of a single protein therapeutic, to the complete characterization of every possible protein including their modifications, which define the human proteoform. Given the controlling influence of protein modifications on their biological function, understanding how gene products manifest or respond to disease is most precisely achieved by characterization at the intact protein level. Top-down mass spectrometry (MS) analysis of proteins entails unique challenges associated with processing whole proteins while maintaining their integrity throughout the processes of extraction, enrichment, purification, and fractionation. Recent advances in each of these critical front-end preparation processes, including minimalistic workflows, have greatly expanded the capacity of MS for top-down proteome analysis. Acknowledging the many contributions in MS technology and sample processing, the present review aims to highlight the diverse strategies that have forged a pathway for top-down proteomics. We comprehensively discuss the evolution of front-end workflows that today facilitate optimal characterization of proteoform-driven biology, including a brief description of the clinical applications that have motivated these impactful contributions.

Maximizing Cumulative Trypsin Activity with Calcium at Elevated Temperature for Enhanced Bottom-Up Proteome Analysis.

Bottom-up proteomics relies on efficient trypsin digestion ahead of MS analysis. Prior studies have suggested digestion at elevated temperature to accelerate proteolysis, showing an increase in the number of MS-identified peptides. However, improved sequence coverage may be a consequence of partial digestion, as higher temperatures destabilize and degrade the enzyme, causing enhanced activity to be short-lived. Here, we use a spectroscopic (BAEE) assay to quantify calcium-stabilized trypsin activity over the complete time course of a digestion. At 47 °C, the addition of calcium contributes a 25-fold enhancement in trypsin stability. Higher temperatures show a net decrease in cumulative trypsin activity. Through bottom-up MS analysis of a yeast proteome extract, we demonstrate that a 1 h digestion at 47 °C with 10 mM Ca2+ provides a 29% increase in the total number of peptide identifications. Simultaneously, the quantitative proportion of peptides with 1 or more missed cleavage sites was diminished in the 47 °C digestion, supporting enhanced digestion efficiency with the 1 h protocol. Trypsin specificity also improves, as seen by a drop in the quantitative abundance of semi-tryptic peptides. Our enhanced digestion protocol improves throughput for bottom-up sample preparation and validates the approach as a robust, low-cost alternative to maximized protein digestion efficiency.

Organic Solvent-Based Protein Precipitation for Robust Proteome Purification Ahead of Mass Spectrometry.

While multiple advances in mass spectrometry (MS) instruments have improved qualitative and quantitative proteome analysis, more reliable front-end approaches to isolate, enrich, and process proteins ahead of MS are critical for successful proteome characterization. Low, inconsistent protein recovery and residual impurities such as surfactants are detrimental to MS analysis. Protein precipitation is often considered unreliable, time-consuming, and technically challenging to perform compared to other sample preparation strategies. These concerns are overcome by employing optimal protein precipitation protocols. For acetone precipitation, the combination of specific salts, temperature control, solvent composition, and precipitation time is critical, while the efficiency of chloroform/methanol/water precipitation depends on proper pipetting and vial manipulation. Alternatively, these precipitation protocols are streamlined and semi-automated within a disposable spin cartridge. The expected outcomes of solvent-based protein precipitation in the conventional format and using a disposable, two-stage filtration and extraction cartridge are illustrated in this work. This includes the detailed characterization of proteomic mixtures by bottom-up LC-MS/MS analysis. The superior performance of SDS-based workflows is also demonstrated relative to non-contaminated protein.

Automated Electrokinetic Platform for High-Throughput Sodium Dodecyl Sulfate Depletion Ahead of Proteome Analysis by Mass Spectrometry.

Sodium dodecyl sulfate (SDS) provides numerous benefits for proteome sample preparation. However, the surfactant can be detrimental to downstream mass spectrometry analysis. Although strategies are available to deplete SDS from proteins, each is plagued by unique deficiencies that challenge their utility for high-throughput proteomics. An optimal approach would rapidly and reproducibly achieve less than 10 ppm residual SDS while simultaneously maximizing analyte recovery. Here, we describe improvements to a simple electrokinetic device termed transmembrane electrophoresis, which we previously reported for automated, rapid SDS depletion of proteome samples. Voltage-driven transport of SDS across a molecular weight cutoff membrane is enhanced at higher electric fields, which is herein achieved by integrating an active cooling mechanism to mitigate the impacts of Joule heating. We report 99.9% reduction of SDS (final concentration < 5 ppm) in 5 min. The device is employed in a detergent-based proteomic workflow for analysis of an enriched yeast membrane proteome extract, demonstrating quantitative protein recovery (>98%) and increasing the number of identifications by liquid chromatography-tandem mass spectrometry.

Mass spectrometry profiling of low molecular weight proteins and peptides isolated by acetone precipitation.

Solvent-based protein precipitation provides exceptional recovery, particularly when the ionic strength of the solution is controlled. While precipitation is ideally suited for intact protein purification ahead of mass-spectrometry, low molecular weight (LMW) proteins and peptides are considered less susceptible to aggregation in organic solvent. As the combination of salt and organic solvent (i.e. acetone) has yet to be exploited to precipitate LMW proteins, we herein determine the low mass limit for solvent-based protein precipitation. We establish optimized conditions for high recovery precipitation of LMW proteins and peptides. Our results demonstrate a strong dependence on the type of salt to recover LMW components from complex mixtures. Inclusion of 100 mM ZnSO4 with 97% acetone provides near quantitative recovery of all peptides down to 2 kDa, and continues to exceed 90% yield for peptides at a molecular weight of 1 kDa. A detailed characterization of the precipitated peptides resulting from trypsin and pepsin digestion of complex systems is provided by bottom-up mass spectrometry.

Rapid and Quantitative Protein Precipitation for Proteome Analysis by Mass Spectrometry.

Protein precipitation is a common front-end preparation strategy for proteome analysis, as well as other applications (e.g., protein depletion for small molecule analysis, bulk commercial preparation of protein). Highly variable conditions used to precipitate proteins, ranging in solvent type, strength, time, and temperature, reflect inconsistent and low recovery. As a consequence, incomplete proteome coverage diminishes the utility of precipitation for proteome sample preparation ahead of mass spectrometry. We herein investigate and optimize the conditions affecting protein recovery through precipitation using acetone at a defined ionic strength. By increasing the salt concentration and incubation temperature with 80% acetone, we show that rapid (2 min) precipitation provides consistently high protein recovery (98 ± 1%) of complex proteome extracts. Rapid precipitation is also applicable to isolate dilute proteins starting as low as 1 µg mL-1. Furthermore, analysis of the protein pellet by bottom-up mass spectrometry (MS) reveals unbiased recovery of all proteins with respect to molecular weight, isoelectric point (pI), and hydrophobicity. Our robust strategy to isolate proteins maximizes recovery and throughput, exploiting the analytical advantages of precipitation over alternative techniques. Data are available via ProteomeXchange with identifier PXD015674.

Developing front-end devices for improved sample preparation in MS-based proteome analysis.

Chemical analysis has long relied on instrumentation, from the simplest (eg, burets) to the more sophisticated (eg, mass spectrometers) to facilitate precision measurements. Regardless of their complexity, the development of a new instrumental device can be a valued approach to address problems in science. In this perspective, we outline the process of novel device design, from early phase conception to the manufacturing and testing of the tool or gadget. Focus is placed on the development of improved front-end devices to facilitate protein sample manipulations ahead of mass spectrometry, which therefore augment the proteomics workflow. Highlighted are some of the many training secrets, choices, and challenges that are inherent to the often iterative process of device design. In hopes of inspiring others to pursue instrument design to address relevant research questions, we present a summary list of points to consider prior to innovating their own devices.

A robust strategy for proteomic identification of biomarkers of invasive phenotype complexed with extracellular heat shock proteins.

As an extension of their orchestration of intracellular pathways, secretion of extracellular heat shock proteins (HSPs) is an emerging paradigm of homeostasis imperative to multicellular organization. Extracellular HSP is axiomatic to the survival of cells during tumorigenesis; proportional representation of specific HSP family members is indicative of invasive potential and prognosis. Further significance has been added by the knowledge that all cancer-derived exosomes have surface-exposed HSPs that reflect the membrane topology of cells that secrete them. Extracellular HSPs are also characteristic of chronic inflammation and sepsis. Accordingly, interrogation of extracellular HSPs secreted from cell culture models may represent a facile means of identifying translational biomarker signatures for targeting in situ. In the current study, we evaluated a simple peptide-based multivalent HSP affinity approach using the Vn96 peptide for low speed pelleting of HSP complexes from bioreactor cultures of cell lines with varying invasive phenotype in xenotransplant models: U87 (glioblastoma multiforme; invasive); HELA (choriocarcinoma; minimally invasive); HEK293T (virally transformed immortalized; embryonic). Proteomic profiling by bottom-up mass spectrometry revealed a comprehensive range of candidate biomarkers including primary HSP ligands. HSP complexes were associated with additional chaperones of prognostic significance such as protein disulfide isomerases, as well as pleiotropic metabolic enzymes, established as proportionally reflective of invasive phenotype. Biomarkers of inflammatory and mechanotransductive phenotype were restricted to the most invasive cell model U87, including chitinase CHI3L1, lamin C, amyloid derivatives, and histone isoforms.

Membrane-Based SDS Depletion Ahead of Peptide and Protein Analysis by Mass Spectrometry.

SDS interferes with both bottom-up and top-down MS analysis, requiring removal prior to detection. Filter-aided sample preparation (FASP) is favored for bottom-up proteomics (BUP) while acetone precipitation is popular for top-down proteomics (TDP). We recently demonstrated acetone precipitation in a membrane filter cartridge. Alternatively, our automated electrophoretic device, termed transmembrane electrophoresis (TME), depletes SDS for both TDP and BUP studies. Here TME is compared to these two alternative methods of SDS depletion in both BUP and TDP workflows. To do so, a modified FASP method is described applicable to the SDS purification and recovery of intact proteins, suitable for LC/MS. All three methods reliably deplete >99.8% SDS. TME provide higher sample yields (average 90%) than FASP (55%) or acetone precipitation (57%), translating into higher total protein identifications (973 vs 877 FASP or 890 acetone) and higher spectral matches (2.5 times) per protein. In a top down workflow, each SDS-depletion method yields high-quality MS spectra for intact proteins. These results show each of these membrane-based strategies is capable of depleting SDS with high sample recovery and high spectra quality for both BUP and TDP studies.

The benefits (and misfortunes) of SDS in top-down proteomics.

Top-down proteomics (TDP) has great potential for high throughput proteoform characterization. With significant advances in mass spectrometry (MS) instrumentation permitting tandem MS of large intact proteins, a limitation to the widespread adoption of TDP still resides on front-end sample preparation protocols (e.g. fractionation, purification) that are amenable to MS analysis of intact proteins. Chromatographic strategies are improving but pose higher risk of sample loss. Gel-based separations (e.g. GELFrEE) may alleviate this concern but at the expense of requiring sodium dodecyl sulfate (SDS). While this surfactant maintains protein solubility during fractionation, the advantage is short-lived, as the detergent must ultimately be depleted to avoid MS signal suppression. To do so requires overcoming strong interactions between SDS and protein. Adding to the challenge, one must now consider upholding the solubility of purified protein(s) in the absence of SDS. This review explores uses of SDS in TDP workflows, addressing front-end strategies that reduce matrix interferences while maximizing recovery of intact proteins in MS-compatible formats. SIGNIFICANCE: The benefits of employing SDS in a TPD workflow can easily outweigh the disadvantages. Several SDS depletion strategies are available, though not all are equally amenable to TDP. This review provides a comprehensive and critical accounting of SDS in TDP, demonstrating methods that are suited to MS analysis of intact proteins.

Differential Proteome Analysis of Extracellular Vesicles from Breast Cancer Cell Lines by Chaperone Affinity Enrichment.

The complexity of human tissue fluid precludes timely identification of cancer biomarkers by immunoassay or mass spectrometry. An increasingly attractive strategy is to primarily enrich extracellular vesicles (EVs) released from cancer cells in an accelerated manner compared to normal cells. The Vn96 peptide was herein employed to recover a subset of EVs released into the media from cellular models of breast cancer. Vn96 has affinity for heat shock proteins (HSPs) decorating the surface of EVs. Reflecting their cells of origin, cancer EVs displayed discrete differences from those of normal phenotype. GELFrEE LC/MS identified an extensive proteome from all three sources of EVs, the vast majority having been previously reported in the ExoCarta database. Pathway analysis of the Vn96-affinity proteome unequivocally distinguished EVs from tumorigenic cell lines (SKBR3 and MCF-7) relative to a non-tumorigenic source (MCF-10a), particularly with regard to altered metabolic enzymes, signaling, and chaperone proteins. The protein data sets provide valuable information from material shed by cultured cells. It is probable that a vast amount of biomarker identities may be collected from established and primary cell cultures using the approaches described here.

Mass Spectrometry of Intact Proteins Reveals +98 u Chemical Artifacts Following Precipitation in Acetone.

Protein precipitation in acetone is frequently employed ahead of mass spectrometry for sample preconcentration and purification. Unfortunately, acetone is not chemically inert; mass artifacts have previously been observed on glycine-containing peptides when exposed to acetone under acidic conditions. We herein report a distinct chemical modification occurring at the level of intact proteins when incubated in acetone. This artifact manifests as one or more satellite peaks in the MS spectrum of intact protein, spaced 98 u above the mass of the unmodified protein. Other artifacts (+84, +112 u) also appear upon incubation of proteins or peptides in acetone. The reaction is pH-sensitive, being suppressed when proteins are exposed to acetone under acidic conditions. The +98 u artifact is speculated to originate through an intermediate product of aldol condensation of acetone to form diacetone alcohol and mesityl oxide. A +98 u product could originate from nucleophilic attack on mesityl oxide or through condensation with diacetone alcohol. Given the extent of modification possible upon exposure of proteins to acetone, particularly following overnight solvent exposure or incubation at room temperature, an awareness of the variables influencing this novel modification is valued by proteomics researchers who employ acetone precipitation for protein purification.

Automated SDS Depletion for Mass Spectrometry of Intact Membrane Proteins though Transmembrane Electrophoresis.

Membrane proteins are underrepresented in proteome analysis platforms because of their hydrophobic character, contributing to decreased solubility. Sodium dodecyl sulfate is a favored denaturant in proteomic workflows, facilitating cell lysis and protein dissolution; however, SDS impedes MS detection and therefore must be removed prior to analysis. Although strategies exist for SDS removal, they provide low recovery, purity, or reproducibility. Here we present a simple automated device, termed transmembrane electrophoresis (TME), incorporating the principles of membrane filtration, but with an applied electric current to ensure near-complete (99.9%) removal of the surfactant, including protein-bound SDS. Intact proteins are recovered in solution phase in high yield (90-100%) within 1 h of operation. The strategy is applied to protein standards and proteome mixtures, including an enriched membrane fraction from E. coli, resulting in quality MS spectra free of SDS adducts. The TME platform is applicable to both bottom-up MS/MS as well as LC-ESI-MS analysis of intact proteins. SDS-depleted fractions reveal a similar number of protein identifications (285) compared wit a non-SDS control (280), being highly correlated in terms of protein spectral counts. This fully automated approach to SDS removal presents a viable tool for proteome sample processing ahead of MS analysis. Data are available via ProteomeXchange, identifier PXD003941.

Preventing N- and O-formylation of proteins when incubated in concentrated formic acid.

Concentrated formic acid is among the most effective solvents for protein solubilization. Unfortunately, this acid also presents a risk of inducing chemical modifications thereby limiting its use in proteomics. Previous reports have supported the esterification of serine and threonine residues (O-formylation) for peptides incubated in formic acid. However as shown here, exposure of histone H4 to 80% formic (1 h, 20(o) C) induces N-formylation of two independent lysine residues. Furthermore, incubating a mixture of Escherichia coli proteins in formic acid demonstrates a clear preference toward lysine modification over reactions at serine/threonine. N-formylation accounts for 84% of the 225 uniquely identified formylation sites. To prevent formylation, we provide a detailed investigation of reaction conditions (temperature, time, acid concentration) that define the parameters permitting the use of concentrated formic acid in a proteomics workflow for MS characterization. Proteins can be maintained in 80% formic acid for extended periods (24 h) without inducing modification, so long as the temperature is maintained at or below -20(o) C.

A two-stage spin cartridge for integrated protein precipitation, digestion and SDS removal in a comparative bottom-up proteomics workflow.

Protein precipitation with organic solvent is an effective means of depleting contaminants such as sodium dodecyl sulfate (SDS), while maintaining high analyte recovery. Here, we report the use of a disposable two-stage spin cartridge to facilitate isolation of the precipitated protein, with subsequent enzyme digestion and peptide cleanup in the cartridge. An upper filtration cartridge retains over 95% of the protein (10 µg BSA), with 99.75% detergent depleted from a sample initially containing 2% SDS. Following precipitation, a plug attached to the base of the filtration cartridge retains the solution to enable tryptic digestion in the vial, while a solid phase extraction cartridge attached to the base of the filter facilitates peptide cleanup post-digestion. A GELFrEE fractionated Escherichia coli proteome extract processed with the spin cartridge yields similar protein identifications compared to controls (226 vs 216 for control), and with an increased number of unique peptides (1753 vs 1554 for control). The device is applied to proteome characterization of rat kidneys experiencing a surgically induced ureteral tract obstruction, revealing several statistically altered proteins, consistent with the morphology and expected pathophysiology of the disease. BIOLOGICAL SIGNIFICANCE: Conventionally, protein precipitation involves extended centrifugation to pellet the sample, with careful pipetting to remove the supernatant without disturbing the pellet. The method is not only time consuming but is highly subject to the skill of the individual, particularly at lower protein concentrations where the pellet may not be visible. As such, protein precipitation is often overlooked in proteomics, favoring column-based approaches to concentrate or purify samples. Here, all aspects of sample manipulation are integrated into a simple disposable cartridge. The device enables SDS depletion, sample preconcentration, resolubilization, derivatization, digestion, and peptide cleanup in a highly repeatable and easily multiplexed format. The device is ideally suited for comparative proteome studies. Antenatal hydronephrosis is a congenital disorder affecting 1-5% of all pregnancies, and can require surgical intervention to avoid loss of renal function. Using our device, we investigated the impact of hydronephrosis on the kidneys in a surgically induced animal model of the disease. Proteome analysis points to decreased metabolic activity in the obstructed kidney, with upregulation of proteins involved in cytoskeletal organization. This article is part of a Special Issue entitled: Protein dynamics in health and disease. Guest Editors: Pierre Thibault and Anne-Claude Gingras.

Resolubilization of precipitated intact membrane proteins with cold formic acid for analysis by mass spectrometry.

Protein precipitation in organic solvent is an effective strategy to deplete sodium dodecyl sulfate (SDS) ahead of MS analysis. Here we evaluate the recovery of membrane and water-soluble proteins through precipitation with chloroform/methanol/water or with acetone (80%). With each solvent system, membrane protein recovery was greater than 90%, which was generally higher than that of cytosolic proteins. With few exceptions, residual supernatant proteins detected by MS were also detected in the precipitation pellet, having higher MS signal intensity in the pellet fraction. Following precipitation, we present a novel strategy for the quantitative resolubilization of proteins in an MS-compatible solvent system. The pellet is incubated at -20 °C in 80% formic acid/water and then diluted 10-fold with water. Membrane protein recovery matches that of sonication of the pellet in 1% SDS. The resolubilized proteins are stable at room temperature, with no observed formylation as is typical of proteins suspended in formic acid at room temperature. The protocol is applied to the molecular weight determination of membrane proteins from a GELFrEE-fractionated sample of Escherichia coli proteins.